|
|
Engine Compartment before we start on the removal - Note the heater system not hooked up
Master Cylinder with out a Vacuum booster ~ A/C compressor Location
Removing the Radiator and the front cross member
Prior Owner had installed these body mounts upside down
Front fenders removed and the heat box and fan removed
Front Fenders, Front Cross member and Radiator removed
Header, Drive Shaft and Distributor Cap Removed
Using the Engine Host to pull the engine and transmission as one unit
Barry Braking loose the flywheel bolts
Robert removing the flywheel
Transmission on a skid, going to transmission to replace all seals and gaskets
Engine compartment after the engine/ transmission removal
|
|
Send mail to
Jeff@rietzusa.com with
questions or comments about this web site.
|