|
|
|
|
Installing the Dash Bezel and hooking up the radio
Adjusting the valves
Drivers seat installed with a four point seat belt and wire harness in the truck completed
Rear Trunk lid installed was well as the valve covers installed
Hood installed
After the test drive we found out the complete front end needed replacement
Installed new American Racing Wheels
After Adjusting the valves about 5 times and driving the car for about 30 minutes we had a problem
The Pushrods guides are worn out and need to have new guides installed
We also installed new Heavy duty roller rocker arms
Barry Removing the Head due to the fact that the Rocker arm stud were installed wrong.
As you can see the stud are off at a angle to the left, The engine with the heads removed
Heads came back with new straight studs and new push rod valve guides installed
Heads are repainted and cleaned up, ready to be installed
|
|
|
Send mail to
Jeff@rietzusa.com with
questions or comments about this web site.
|
