|
|
|
|
Getting ready for surface preparation for POR-15
The Front end after the 1st application of POR-15
Applying POR-15 To the Driver side front frame
Reworked the Vacuum Brake Booster
Removed the front disc brake caliper
Installed new Brake Calipers, Brake Pads
Before and after cleaning the front wheel lug nuts
Put the Bronco on wheel dolly's so it can be moved around in the garage
Removing the 10 body to frame mounting bolts,
Rising up one side of the Bronco to install new Polyurethane bushingsa and a 2 inch body lift Removed the old Rubber body mount and getting ready to install the new items
The passenger side has been raised with wood blocks about 2"
After cutting the body to frame mounts
Before and after sand blasting the body to frame nuts
|
|
|
Send mail to
Jeff@rietzusa.com with
questions or comments about this web site.
|
